Xbox flash software

You can use an extension cable if you can't reach a port. More lights should appear on the USB connector when plugged into the computer. Part 4. Start JungleFlasher. Once the drive is connected to the USB tool and your computer, you can start JungleFlasher to begin the flashing process.

Check your key status. Click the DVDKey 32 tab. This will display all the information on your drive's DVD key, which is essential for flashing. Unlock the drive. If you've never flashed the drive before click Yes , otherwise follow the instructions in the dialog box. Wait for the drive to unlock.

You will see text in the box at the bottom of the window. The "Vendor" field should read "Drive in Vendor Mode". Copy the old firmware. Click the Read button. JungleFlasher will begin reading the Samsung firmware files. After it's finished, you will be prompted to save the original firmware as a backup. Choose a location that you can easily find if you want to restore your original firmware files. Load the new firmware. Click Yes to proceed. Save your drive key.

Click the Save Drive Key button and save the drive key somewhere safe. This will be useful if you want to restore your drive later. Save your custom firmware. Click the Save to File button to save your custom firmware files. This will make flashing the same drive in the future much easier. Write the new firmware. You can monitor the writing process in the text box at the bottom of the window.

The writing process will take a little while. Exit vendor mode. This will keep your Xbox from getting banned immediately from Xbox Live. Check which Hitachi drive you have. Click the Hitachi GDR tab. Click the "Insert the 79 Unlock Audio CD" link, which will open your browser and attempt to download a file.

Save the file and then extract it. See this guide for more details. Turn on Mode-B. A window will appear with instructions, but these can be ignored since you're using the USB connector tool. Insert the unlock disc. After you are in Mode-B, click the Open button to open the drive tray.

Insert the disc and then click the Close button. Click the 79 Unlock button to read the disc. The drive will eject the disc automatically when finished. This step is only required if you have a version 79 drive. Dump the drive data. In the "Flashing Options" section, make sure the "Dump Drive" option is selected, and then click the Read to Source button.

Save the drive data backup file somewhere easily accessible in case you want to restore the drive later. Click the Flash LT-Plus button. Click Yes when the program says that the flashing report is stable.

Wait for the flashing process to complete. You can see the progress in the text box at the bottom of the window. Once the flashing process is complete, return to the Hitachi GDR tab. The DVD drive will be unlocked automatically. JungleFlasher will begin reading the BenQ firmware files. The writing process shouldn't take too long.

Flip your disassembled Lite-On drive to find the circuitry board. The MPX01 point is located on the circuitry of the DVD drive, and is where you will need to probe during the flashing process. You can find the MPX01 point next to the large chip installed on the circuitry. Get ready to probe the drive. Click the PhatKey button and wait a few moments for the program to load.

You are now ready to probe the drive. Ensure that the light on the probe is on, indicating it is receiving power. Probe the drive. When the window pops up, press and hold the button on the probe cable. With the button held down, touch the probe to the MPX01 point. Release the probe cable button while continuing to hold the probe on the point. Click the Yes button on the window in JungleFlasher. Remove the probe and reset the drive. Restart the console.

When the console restarts, the installation program starts automatically. Select Yes when you are prompted to update the new console software. Here's other similar drivers that are different versions or releases for different operating systems: Microsoft Xbox Firmware 2.

Microsoft Xbox Controller Driver v1. Microsoft Xbox Wireless Controller Driver 1. Microsoft Xbox Controller Driver 1. Microsoft Xbox Dashboard Firmware Update 2. Select the amount of drive space you would like to configure, then press 'A. Choose 'Yes,' if you chose to 'Configure now,' to delete all data from the USB flash drive and begin the automatic configuration process. Choose 'Configure' if you chose to 'Customize' the drive to begin the configuration process.

Save game content as you normally would, but instead of choosing your hard drive or memory unit, select your USB storage device from the 'select storage device' list.

Update the Xbox to which you want to transfer game content by logging into Xbox Live and automatically updating the console when prompted. If you aren't prompted, then the Xbox is already updated. You will be directed to a content selection screen. Select the device you want to transfer data to, such as your hard drive or memory unit. A list of stored content on your USB flash drive will appear. Choose the content you wish to transfer from the resulting list of data stored on your USB flash drive.

Highlight 'Start' then press 'A' to begin putting game content data on the Xbox through the flash drive. Dec 19, - Try them to transfer old Xbox games and save files to Xbox One to move to the new. Download and install data transfer software on your PC. Save and Transfer Game Content Save game content as you normally would, but instead of choosing your hard drive or memory unit, select your USB storage device from the 'select storage device' list.

Turn off your Xbox console, then disconnect your flash drive. Plug the USB flash drive into the Xbox to which you want to transfer game content. Press 'Y' to open the content transfer wizard.